When we use electricity, it is driven by wires and circuits. Electricity will flow through a path on a wire and when it hits a circuit do a specific task. It will either stop which means the circuit is closed or it will continue on which means the circuit is on. We can control this flow with a switch. When we have a short circuit this path is interrupted and needs to be looked at by electrical contractors in Lexington, KY.
How do we fix a short circuit?
When the electricity is short circuited it doesn’t do what it supposed to. It might only turn on one light when you have more than one or it just won’t turn off like a light switch.
Look at the circuit breaker
The first thing that you will need to do is look at the circuit breaker. Turn that circuit breaker off and see if the problem continues. If it does then you have found your problem place to start looking.
When turning off the circuit breaker, make sure you are near a light switch or plug in so you can see what is happening to the light. Once everything is turned off, make sure you turn on the light source that is not working to see if it is still off. If it is still off then we have found the short circuit.
Look at the wiring
If no luck so far, look at the wiring itself and check for any corrosion or loose connections on the wiring. If there are any corrosion areas on your wires you can use a pencil eraser to remove this. Sometimes the connections might be loose and you can tighten them up with your hands or a screwdriver. If it still doesn’t work, call an electrician to have him check what is wrong with the circuit itself.